However, sometimes problems do arise from time to time, like when the remote control stops functioning properly. If you find yourself in this situation, don’t worry – many solutions are available for resetting your AT&T TV remote. Are you curious how? Read further to know how easy it really is!
Reasons you may need to Reset Your AT&T Remote Control
Before we start, let’s discuss why you may need to reset your AT&T remote in the first place. Look through the list and see if you’re facing any of the following problems.
1 Reasons you may need to Reset Your AT&T Remote Control1.1 Reason#1) Physical Damage To The Remote 1.2 Reason#2) Slow Responsive or Unresponsive Remote Control1.3 Reason#3) Some buttons are working, but others are not2 How To Reset AT&T TV Remote Control2.1 Method#1) Check the Batteries2.2 Method#2) Check for interference between the Remote Control and the TV Sensor2.3 Method#3) Resetting the Remote2.4 Method#4) Call AT&T Customer Support3 How To Reset AT&T TV Remote Control – Steps for Specific Models3.1 Type #1) For the S10, Silver, and Point Anywhere Remote Controls 3.2 Type #2) For the S20 and S30 Black Remote Controls4 How to Re-pair Your AT&T Remote Control5 What If Resetting The Remote Doesn’t Work? 6 Final Thoughts
Reason#1) Physical Damage To The Remote
Have you dropped your AT&T TV remote control recently? That may be the reason it’s not working. Check if there are any visible signs of damage.
Reason#2) Slow Responsive or Unresponsive Remote Control
What if your AT&T remote control does respond to commands but very slowly? Resetting the remote control can also fix this issue.
Reason#3) Some buttons are working, but others are not
Try resetting the remote if some of the buttons on the remote control are working, but others are not. This problem may indicate a more severe issue with the remote. However, trying to fix the problem using this method is still worth a shot. If you’re facing any of these issues, then keep reading. We’ll explain how you can reset your AT&T TV remote and eliminate the problem!
How To Reset AT&T TV Remote Control
Before you try resetting your AT&T Remote Control, you should check a few things. The process is not complicated, and we’ll walk you through it. There are different types of AT&T remotes. This article will first explain the general method for resetting a remote. We’ll also cover the steps to follow for common remote control models.
Method#1) Check the Batteries
It’s possible that the remote control isn’t working because the batteries are dead or old. Before resetting the remote, switch out the batteries and check if this is the issue. Once you have determined that the batteries aren’t the problem, proceed to the next step.
Method#2) Check for interference between the Remote Control and the TV Sensor
There may be some obstruction between the remote control and the TV sensor. This may be the reason that the remote control is not responding. Once you have determined that there is no physical obstruction, try to clean the sensor on the TV. Check if the remote is working now. If it’s not, proceed to the next step.
Method#3) Resetting the Remote
To reset the remote, you must unpair it and restart it. That may sound complicated, but all you need to do is complete the following steps. This will reset your device. Pair your remote control with the AT&T streaming device again to use it. If this doesn’t work, repeat the steps.
Method#4) Call AT&T Customer Support
If resetting the remote doesn’t work, you may need to call AT&T customer support. There may be a manufacturing fault with the remote. You may need to get it replaced. AT&T customer support will guide you further. They may send a technician to your house or order a replacement.
How To Reset AT&T TV Remote Control – Steps for Specific Models
We’ll now go over the details steps to reset your remote control for specific models. To know the model of your remote control, you can look through the instruction manual that arrived with your TV. The general process is still the same: you must unpair the device and restart it. However, slight differences may exist, such as what buttons you need to press.
Type #1) For the S10, Silver, and Point Anywhere Remote Controls
Type #2) For the S20 and S30 Black Remote Controls
How to Re-pair Your AT&T Remote Control
Once the remote control has been reset, you‘ll need to re-pair it to your streaming device. After this step, the remote control will be ready for use again. To re-pair your AT&T TV remote control, complete the following steps.
What If Resetting The Remote Doesn’t Work?
If resetting the remote did not fix the problem, it may be time to consult AT&T customer service. You can call 833-596-1535 for further assistance. AT&T customer support can help you determine if there’s a problem with the remote or the TV streaming device. They may send a technician to your home. Be sure to check if your AT&T TV is still under warranty.
Final Thoughts
Resetting the AT&T TV remote control is easy. It can fix a lot of issues that you may be facing. These include issues such as whether the remote is unresponsive or some of the buttons are not working. This article has explained all the steps you need to follow to reset your AT&T remote control. We’ve explained the steps you must follow for any AT&T remote control. We’ve also discussed the detailed steps for common remote control models such as the S20 and S30 remotes. Read this article closely; we’re positive you won’t encounter any problems.
